Zevvy Plan a route

Safety Building EV Charging Station, 335 W Third St, Dayton, OH

Safety Building is a AmpUp charging location at 335 W Third St, Dayton, Ohio, with J1772 (Type 1) across 1 charge point rated up to 3.7 kW.

Where Safety Building is

335 W Third St, Dayton, OH, 45402

Location detail for Safety Building
FieldValue
Street335 W Third St
CityDayton
StateOhio
Coordinates39.75894, -84.19756
Network operatorAmpUp

Connectors and power at Safety Building

Connector types recorded at Safety Building
ConnectorCurrentTypical use
J1772 (Type 1)ACSlower top-up over a longer stay

The highest output recorded for this location is 3.7 kW. Zevvy stores a power rating only where the source published one, so this figure is read from the record rather than estimated.

How long charging takes at Safety Building

Time to take a battery from 10 to 80 per cent at the 3.7 kW recorded here. Formula: minutes = battery kWh × 0.7 ÷ 3.7 × 60. This is the floor, not the typical: on AC the car's own onboard charger sets the ceiling, and many cars accept less than a post can supply. Battery sizes are examples; check your own car's usable capacity.

Minimum 10–80% charging time at Safety Building
Battery sizeEnergy addedMinimum time
60 kWh42 kWh11 hr 20 min
80 kWh56 kWh15 hr 10 min
100 kWh70 kWh18 hr 55 min

Charging around Safety Building

36 other charging locations are mapped within 3 mi of Safety Building, 3 of them with DC fast charging. Safety Building has no DC fast charging recorded; the closest location that does is Red E Charging Station, 0.6 mi north.

Safety Building is one of 74 charging locations Zevvy has mapped in Dayton; 9 of them have DC fast charging. 70 locations in Dayton have a higher recorded output than its 3.7 kW.

Which cars can charge at Safety Building

Any car with a J1772 (Type 1) inlet can plug in directly; a car with a different inlet needs an adapter rated for this connector.

Is it working?

Zevvy has no live status for Safety Building, so we don't show one. Chargers go down without warning, which is why the nearest alternatives are listed below.

Nearest alternative chargers to Safety Building

Plan a trip through Dayton

Zevvy's planner picks charging stops for your car and starting charge across the full route, not just this location.

Open the route planner

Frequently asked questions

Is Safety Building working right now?
We can't tell you. Zevvy has no live status for this charger and would rather say so than guess. If you're counting on it, have a look at the nearby alternatives on this page, and check the unit when you get there.
What connectors does Safety Building have?
J1772 (Type 1) (AC) across 1 charge point, rated up to 3.7 kW.
Is Safety Building a fast charger?
No. Only AC charging is recorded at Safety Building, which suits a longer stay rather than a quick highway stop. The nearest DC fast charger mapped is Red E Charging Station, 0.6 mi away.
How long does it take to charge at Safety Building?
At its rated 3.7 kW, taking a battery of 80 kWh from 10 to 80 per cent takes at least 15 hr 10 min. On AC the car's onboard charger sets the ceiling, so many cars will take longer than this.
How much does it cost to charge at Safety Building?
Tariffs are not recorded in Zevvy's dataset for this location, so we do not publish a price. AmpUp sets the tariff at this site; check their app or the unit before plugging in.
Which cars can charge at Safety Building?
Any car with a J1772 (Type 1) inlet can plug in directly; a car with a different inlet needs an adapter rated for this connector. This location has no DC fast charging recorded, so expect a slower top-up.
What is the nearest alternative to Safety Building?
ChargePoint Charging Station, 0.1 mi away, with J1772 (Type 1). 4 further alternatives are listed on this page.

More charging near Safety Building